Hyco Handyflow 2kW 5Ltr Oversink water heater
£70.56 inc VAT
£58.80 exc VAT
Hyco Handyflow Resetable 2kW 5Ltr Oversink water heater.
Supplied with Inlet Tap and Chrome Spout.
Supplied with Inlet Tap and Chrome Spout.
- Technical Information Phone
- 01977 517555
- Manufacturer
- Hyco
- Product Code
- HF05LQ
- Height
- 422
- Width
- 263
- Depth
- 230
- Length/Diam.
- Spout 10 inches.
• 5L capacity
• external temperature control
• 2kw element
• white corrosion proof case
• CFC free polyurethane insulation
• safety re-settable thermal cut-out
• suitable for single outlet only
• wall fixing bracket for fast installation
The Handyflow is a simple to install traditional vented over sink water heater. With a neat design and supplied complete with tap and spout, the Handyflow offers an effective, practical solution whenever time and simplicity are the key priorities. The Handyflow incorporates a thermal cut-out that can be re-set rather than requiring to be replaced. The unit simply needs to be switched off and it will automatically re-set itself. This feature is particularly useful when the heater is likely to be drained frequently (e.g. when fitted in Portable Buildings).
As with all units of this type, cold water entering from the inlet valve displaces the hot water stored in the tank. It is normal for the spout to drip slightly during the heating cycle, caused by the water expanding as it heats up. Over tightening the tap will not stop the dripping and may result in damage.
• external temperature control
• 2kw element
• white corrosion proof case
• CFC free polyurethane insulation
• safety re-settable thermal cut-out
• suitable for single outlet only
• wall fixing bracket for fast installation
The Handyflow is a simple to install traditional vented over sink water heater. With a neat design and supplied complete with tap and spout, the Handyflow offers an effective, practical solution whenever time and simplicity are the key priorities. The Handyflow incorporates a thermal cut-out that can be re-set rather than requiring to be replaced. The unit simply needs to be switched off and it will automatically re-set itself. This feature is particularly useful when the heater is likely to be drained frequently (e.g. when fitted in Portable Buildings).
As with all units of this type, cold water entering from the inlet valve displaces the hot water stored in the tank. It is normal for the spout to drip slightly during the heating cycle, caused by the water expanding as it heats up. Over tightening the tap will not stop the dripping and may result in damage.
