BELL Aqua Microwave Sensor Professional Series 28W 2D Round Light Fitting
£54.00 inc VAT
£45.00 exc VAT
BELL Aqua Microwave Sensor Professional Series 28W 2D Round Light Fitting
White Surface Fitting, IP65 Rating
315mm Dia, 100mm Height
Microwave motion detection has more advantages than PIR motion sensors.
Master fitting with sensor can activate slave fittings with up to 400w (fluorescent) and 1OOOw (incandescent) lamps.
Detection range from 1m to 11m, with variable hold time from 5 seconds to 25 minutes*.
*Note: For use with 2D lamps hold time is recommended at minimum 20 minutes.
Daylight sensor range from 2 lux to 30 lux, with 5 settings.
Operates regardless of background temperature (eg. cold stores, ski lodges).
Not susceptible to dust build up or debris.
Sensor life span 50,000+ hours.
Why use Microwave technology instead of Infrared?
The BELL Aqua with sensor utilises the latest microwave technology instead of the often used infra red (PIR) type of sensor.
Microwave sensors offer outstanding benefits in comparison with PIR sensors.
Microwave Motion Sensor Advantages
Activated by motion, speed and size. Detects actual movement in range and does not rely on detecting heat.
Operates regardless of background temperature. Unaffected by changes in cold areas where insulating clothing is being used. (e.g. cold stores or ski lodges)
Not susceptible to dust build up or debris.
Stable and reliable.
Long Life span 50000+ hours.
Max Load 1OOOw (incandescent bulbs), 400w (fluorescent lamps)
Standby Power 220-240v SO/60Hz
Interface 3 pole pluggable terminal block (N,L,L) for 1.Smm cable
Sensor Principle Microwave Motion detector
Microwave Frequency 5.8 GHz plus-minus 75 MHz
Microwave Power 1mw
Operating Temperature Range -3S0c to +700c
Supplied with 2D lamp.
White Surface Fitting, IP65 Rating
315mm Dia, 100mm Height
Microwave motion detection has more advantages than PIR motion sensors.
Master fitting with sensor can activate slave fittings with up to 400w (fluorescent) and 1OOOw (incandescent) lamps.
Detection range from 1m to 11m, with variable hold time from 5 seconds to 25 minutes*.
*Note: For use with 2D lamps hold time is recommended at minimum 20 minutes.
Daylight sensor range from 2 lux to 30 lux, with 5 settings.
Operates regardless of background temperature (eg. cold stores, ski lodges).
Not susceptible to dust build up or debris.
Sensor life span 50,000+ hours.
Why use Microwave technology instead of Infrared?
The BELL Aqua with sensor utilises the latest microwave technology instead of the often used infra red (PIR) type of sensor.
Microwave sensors offer outstanding benefits in comparison with PIR sensors.
Microwave Motion Sensor Advantages
Activated by motion, speed and size. Detects actual movement in range and does not rely on detecting heat.
Operates regardless of background temperature. Unaffected by changes in cold areas where insulating clothing is being used. (e.g. cold stores or ski lodges)
Not susceptible to dust build up or debris.
Stable and reliable.
Long Life span 50000+ hours.
Max Load 1OOOw (incandescent bulbs), 400w (fluorescent lamps)
Standby Power 220-240v SO/60Hz
Interface 3 pole pluggable terminal block (N,L,L) for 1.Smm cable
Sensor Principle Microwave Motion detector
Microwave Frequency 5.8 GHz plus-minus 75 MHz
Microwave Power 1mw
Operating Temperature Range -3S0c to +700c
Supplied with 2D lamp.
- Manufacturer
- Bell Lamp & Lighting
- Product Code
- 06690
- Height
- 100mm
- Width
- 315mm Dia
- Depth
- n/a
- Length/Diam.
- n/a
