GALVANISED STEEL DOWNLIGHT INSULATION GUARD LIGHTING ACCESSORY
GALVANISED STEEL DOWN LIGHT INSULATION GUARD LIGHTING ACCESSORY .
FEATURES:
Suitable for installing in insulated loft/roof voids to protect down lights from being covered by insulation material
Suitable for installation between all common joist spacings
Designed to meet compliance of Building Regs Part L, NHBC & other interested parties/insurers' where the loft insulation is to be laid unbroken over the whole ceiling area to avoid "thermal bridging" - i.e. loss of heat through spaces normally required to be cut in the insulation for the fitments of luminaries
Supplied as flat item which easily bent & assembled without tools
Withstands a load of <20kgs (depending on ceiling construction).
FEATURES:
Suitable for installing in insulated loft/roof voids to protect down lights from being covered by insulation material
Suitable for installation between all common joist spacings
Designed to meet compliance of Building Regs Part L, NHBC & other interested parties/insurers' where the loft insulation is to be laid unbroken over the whole ceiling area to avoid "thermal bridging" - i.e. loss of heat through spaces normally required to be cut in the insulation for the fitments of luminaries
Supplied as flat item which easily bent & assembled without tools
Withstands a load of <20kgs (depending on ceiling construction).
- Technical Information Phone
- 0870 4441106
- Manufacturer
- Aurora
- Product Code
- AU-DIG340
- Height
- 150mm
- Width
- 340mm
- Depth
- n/a
- Length/Diam.
- n/a
FEATURES:
Suitable for installing in insulated loft/roof voids to protect down lights from being covered by insulation material
Suitable for installation between all common joist spacings
Designed to meet compliance of Building Regs Part L, NHBC & other interested parties/insurers' where the loft insulation is to be laid unbroken over the whole ceiling area to avoid "thermal bridging" - i.e. loss of heat through spaces normally required to be cut in the insulation for the fitments of luminaries
Supplied as flat item which easily bent & assembled without tools
Withstands a load of <20kgs (depending on ceiling construction).
SPECIFICATION:
.LAMPS NOT INCLUDED.
DIMMABLE: No
MATERIAL: Galvanised Steel
Suitable for installing in insulated loft/roof voids to protect down lights from being covered by insulation material
Suitable for installation between all common joist spacings
Designed to meet compliance of Building Regs Part L, NHBC & other interested parties/insurers' where the loft insulation is to be laid unbroken over the whole ceiling area to avoid "thermal bridging" - i.e. loss of heat through spaces normally required to be cut in the insulation for the fitments of luminaries
Supplied as flat item which easily bent & assembled without tools
Withstands a load of <20kgs (depending on ceiling construction).
SPECIFICATION:
.LAMPS NOT INCLUDED.
DIMMABLE: No
MATERIAL: Galvanised Steel
