Elkay PIR Movement Ocupancy Timer Switch White
£71.76 inc VAT
£59.80 exc VAT
Elkay Energysense PIR Movement Occupancy Timer Switch White. 2mins - 2hours. 16A 2 Wire Incandescent and Fluorescent Load.
- Technical Information Phone
- 01675 468 232
- Manufacturer
- Elkay
- Product Code
- 376A-1
- Height
- n/a
- Width
- n/a
- Depth
- n/a
- Length/Diam.
- n/a
The pirtimer is a fully automatic device which controls various power loads through the detection of body heat.
Activated by the detection of moving body heat, the lighting or power source will then stay on for a pre-set period of time. If body heat is no longer detected, the time period will elapse and the load will be switched off.
An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the pirtimer. The unit also has an override switch on the faceplate.
By removing user interaction, the pirtimer has ultimate
reliability, resulting in a Âfit and forget way of introducing active energy management.
Features:
 Passive Infra Red movement sensor
 16 Amp max load regardless type including resistive loads and incandescent/fluorescent lighting
 Retrofit into a 25mm standardard back boxesRetrofit into a 25mm standardard back boxes
 Re-trigger function
 Concealed fixing screws
 Last minute indicator
 For multiple switching use one master unit with slaves
Activated by the detection of moving body heat, the lighting or power source will then stay on for a pre-set period of time. If body heat is no longer detected, the time period will elapse and the load will be switched off.
An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the pirtimer. The unit also has an override switch on the faceplate.
By removing user interaction, the pirtimer has ultimate
reliability, resulting in a Âfit and forget way of introducing active energy management.
Features:
 Passive Infra Red movement sensor
 16 Amp max load regardless type including resistive loads and incandescent/fluorescent lighting
 Retrofit into a 25mm standardard back boxesRetrofit into a 25mm standardard back boxes
 Re-trigger function
 Concealed fixing screws
 Last minute indicator
 For multiple switching use one master unit with slaves
 |
|
|---|---|
 |
|
 |
|
 |
|
