Niglon Energy Saving SURFACE (PIR) OCCUPANCY DETECTOR.
Also known as Presence Detectors, Movement Detectors, Motion Detectors and PIR's.
Use to turn lights on when a person enters a room and remain on while they are there, then turn off the lights when the room is empty.
Surface mounting, pre-wired with external adjustable time and lux level 10sec - 15min.
Niglon Energy Saving RECESSED (PIR) OCCUPANCY DETECTOR.
Also known as Presence Detectors, Movement Detectors, Motion Detectors and PIR's.
Use to turn lights on when a person enters a room and remain on while they are there, then turn off the lights when the room is empty.
Recessed, ceiling mounting, pre-wired with external adjustable time and lux level - 10sec - 15min.
65mm dia cut-out, 50mm height.
Wall Mounted Dusk till Dawn Photocell Light Switch Kit.
Electronic standard 3 pin 198-264 V/AC, 70 Lux on, 1:1.5 Pos switching diff. + Nema socket, bracket & screws.
Maximum load 5A or 60uF.
Typical load 2 x 258 W/HPS.
Wall Mounted Dusk till Dawn Photocell Light Switch Kit.
Electronic standard 3 pin 198-264 V/AC, 70 Lux on, 1:1.5 Pos switching diff. VDR voltage supression. + Nema socket, bracket & screws.
Maximum load 5A or 60uF.
Typical load 2 x 250W/HPS.
Mini Remote Thermal Photocell IP65 (When Fitted).
Convert your existing light fittings into security lights.
You can mount this photocell in any fitting (space permitting) by drilling a 16mm hole and securing unit with the locknuts & washes provided.
Also known as a Dusk till Dawn Switch.
230-240V 50Hz.
2000W Tungsten or
2 x 400W HPS or
1800VA rated
